Residential Flooring Craft · Powder Springs, GA

Stair Refinishing

Handcrafted sanding, staining, and protective coating for stair treads, risers, and landings. Serving residential homeowners across Powder Springs, Cobb County, and metro Atlanta.

Refinished hardwood stair treads by Wala Hardwood Floors

Stair Refinishing

Stairs are the first thing guests see when they walk in, and they take more punishment than almost any other surface in the house. Every step lands on the nosing, shoes drag across the tread, and the finish wears thin long before the rest of the floor shows its age. At Wala Hardwood Floors LLC, we refinish residential staircases across Powder Springs, Cobb County and metro Atlanta, and our two person team has been doing it since 2021.

Refinishing stairs is a different animal than refinishing a flat floor. The surfaces are small, vertical, and interrupted by risers, nosings, newel posts and balusters. Sanding a tread without rounding over the nosing, keeping stain off the riser where it should stay clean, and protecting the surrounding walls and spindles all require a careful hand.

We work residential only, we give free in home quotes, and we are available Monday to Saturday from 8:00 AM to 6:00 PM. A refinished staircase changes the whole entry of a home, and it is one of the most rewarding jobs we do.

Treads, Risers and Landings

The tread is the flat part you step on, the riser is the vertical board between treads, and the landing is the wider flat surface at a turn or at the top and bottom of a run. Each of these surfaces wears differently and finishes differently. Treads take the brunt of the foot traffic and usually need the most sanding and the toughest topcoat.

Risers are often left natural or painted, and we talk through the look you want. Landings are high traffic pivot points that need the same durable treatment as treads. We refinish each surface with its role in mind rather than treating the whole staircase as one flat plane.

Matching Stain to the Floors

A staircase rarely exists in isolation. It connects to the hallway and entry floors, and a stair stain that fights the floor color makes the whole space feel off. We work to match the stair stain to the surrounding floors so the staircase reads as part of the same home.

Matching is not always a one to one process. Different wood species on the stairs versus the floor take stain differently, and the smaller surfaces and vertical grain of a tread can read darker or lighter than a wide plank floor in the same stain. We test on the actual stair surfaces and adjust so the final color ties the stairs and the floor together.

Nosing Wear and Why It Matters

The nosing is the rounded front edge of the tread, and it is where every footfall lands. Over years of use, the finish on the nosing wears through first, leaving bare wood that then absorbs dirt and moisture and starts to look dark and tired. Worn nosing is the most common reason a staircase looks old even when the rest of the house does not.

Refinishing restores the nosing by sanding it back to clean wood and rebuilding the protective finish so the edge is sealed again. We pay special attention to the nosing because it is the part that will wear first again, and a properly finished nosing extends the life of the whole staircase.

Safety and Traction Considerations

A staircase is a safety surface, not just a visual one, and the finish choice affects how the stairs perform underfoot. A very high gloss finish on a tread can become slippery, especially in socks or on a humid day. We talk through sheen choices with traction in mind, and we are honest about the tradeoff between a glossy look and a stair that grips.

For households with kids, older adults, or anyone with mobility concerns, we lean toward sheens and finish approaches that keep the tread surface friendly underfoot. A beautiful staircase that is slippery is a staircase that was finished for the photo and not for the people who climb it.

Protecting Walls, Spindles and Balusters

Stair refinishing happens in a tight space surrounded by walls, skirt boards, balusters, and newel posts, and protecting those surfaces is half the craft. We mask and cover the areas around the work so stain and finish stay on the wood they belong on, not on the wall beside it.

Balusters and newel posts often need their own attention. If they are wood and part of the same railing system, we can refinish them to match, and if they are staying as is, we protect them carefully so the staircase reads as one cohesive piece when the work is done.

How We Refinish a Staircase

Stair refinishing is detail work in a tight space, and our process protects everything around it while we work.

  1. 1

    Quote and Color Plan

    We inspect the staircase, identify worn nosings and damaged treads, and talk through the stain color and how it ties to the surrounding floors. You get a clear quote.

  2. 2

    Protect the Surroundings

    We mask walls, skirt boards, balusters, and newel posts so stain and finish stay on the wood they belong on.

  3. 3

    Sand Treads, Risers and Landings

    We sand each surface back to clean wood, paying special attention to the nosing where wear is deepest, without rounding over the edges.

  4. 4

    Stain and Coat

    We apply stain to match the floors, then lay down protective topcoats with the right dry time between each, keeping traction in mind.

  5. 5

    Walkthrough and Cure Guidance

    We walk the refinished staircase with you and explain the dry time, the cure period, and how to keep off it until it is ready.

Is Stair Refinishing Right for My Stairs?

Stair refinishing is the right call when your treads and nosings are worn, scratched, or dark with age but the underlying wood is sound. It restores the look of the whole entry, ties the stairs to the floor color, and extends the life of the staircase without the cost of tearing it out.

It is not the right call when treads are cracked, split, or rotting, or when the staircase structure itself is failing. In those cases tread replacement or a larger scope job makes more sense. We tell you honestly during the quote whether your stairs are candidates for a refinish or need more.

Service Area Coverage

Based in Powder Springs, GA, we provide stair refinishing to homes in Cobb County (Powder Springs, Austell, Marietta, Mableton, Kennesaw, Smyrna, Acworth), Paulding, Douglas, Carroll, North Metro, and South Metro Atlanta. See the full list on our service areas page.

Protective topcoat on a residential wood floor by Wala Hardwood Floors

Stair Refinishing

Protective topcoat on a residential wood floor by Wala Hardwood Floors

Get Your Free Quote

Tell us about your residential flooring project. We respond promptly Monday to Saturday.

Questions Answered

Stair Refinishing FAQ

Can you match the stair stain to my floors?

Yes. We work to match the stair stain to the surrounding floors so the staircase reads as part of the same home. Because different wood species and surfaces take stain differently, we test on the actual stair surfaces and adjust the color to tie the stairs and floor together.

Why do stair nosings wear out first?

The nosing is the rounded front edge of the tread where every footfall lands, so its finish wears through before the rest of the stair. Refinishing sands the nosing back to clean wood and rebuilds the protective finish so the edge is sealed again.

Is a glossy stair finish slippery?

A very high gloss finish on a tread can become slippery, especially in socks or humid conditions. We talk through sheen choices with traction in mind and lean toward finishes that keep the tread friendly underfoot for households with kids or mobility concerns.

Do you refinish risers too?

Yes. We refinish treads, risers, and landings, and we talk through whether you want the riser stained to match or left natural or painted. Each surface is finished with its role in mind.

How do you protect my walls and spindles during stair work?

Stair refinishing happens in a tight space, so we mask and cover walls, skirt boards, balusters, and newel posts so stain and finish stay on the wood they belong on. If balusters and newels are part of the same railing system, we can refinish them to match.

How long do I need to stay off refinished stairs?

Stairs need a dry and cure period after the final coat before they take normal traffic. We walk you through the exact timeline for your job, including when it is safe to walk in socks versus shoes.

Can you fix cracked stair treads?

If a tread is cracked, split, or rotting, refinishing alone is not enough and the tread may need replacement. We tell you honestly during the quote whether your stairs are candidates for a refinish or need tread replacement.

The First Thing Guests See

Stairs That Look as Good as the Floors

Refinished treads, matched stain, and protected nosings turn a worn staircase into the centerpiece of your entry.

Call for a Free Quote: (770) 837-8367