Fayetteville, Fayette County · about 40 miles from our Powder Springs base

Hardwood Flooring in Fayetteville, GA

Fayetteville homeowners matching new floors to existing floors in additions and remodels. Species, width, and stain matching. Free quotes. Call (770) 837-8367.

New hardwood floor blended into existing floor by Wala Hardwood Floors

Fayetteville, GA Service Area

Fayetteville sits about 40 miles from our Powder Springs base in Fayette County, where it is the county seat. The historic Fayette County Courthouse sits on the square, and Trilith is nearby. A lot of the calls we get here are from homeowners in the middle of an addition or a remodel, where new floor space is being tied into existing floors, and the question is how to make the new and the old read as one.

Matching new hardwood to existing hardwood is a craft problem as much as a flooring problem. The species, the board width, and the stain all have to line up, and even then the new wood will look a little different from the old wood until the whole floor is sanded and finished together. We help Fayetteville homeowners plan that match so the seam between new and old disappears.

Why New and Old Floors Do Not Match Out of the Box

Even when you buy the same species and width as the existing floor, new hardwood looks different from old hardwood. The old floor has aged, been exposed to light, and been finished years ago, while the new wood is fresh and has not settled into its color yet. Put them side by side before any work, and the new boards read as brighter and cleaner than the old ones.

That is normal, and it is why matching is a process, not a single purchase. The way to make new and old read as one is to sand the whole floor, new and old together, and apply one stain and one finish across everything. That single finish coat is what unifies the two. See our custom flooring page for how we approach blending.

Matching the Species

The first step in matching is getting the species right. Red oak and white oak are the most common in Fayetteville homes, and they take stain differently, so a red oak floor matched with white oak new boards will read as two different tones even under the same stain. We identify the existing species during the quote and source new boards of the same species.

Sometimes the existing floor is a species that is harder to match, like hickory or maple, and we track down the closest match we can. The closer the species, the better the final blend. See our hardwood floor staining page for how different species take stain, which is the heart of why species matching matters.

Matching the Board Width and Cut

Board width is the next thing to match. A floor of wide planks matched with narrow new boards will always read as a patch, no matter how well the stain matches, because the rhythm of the boards is different. We measure the existing width and source new boards to match it, so the line of the boards continues across the seam.

The cut matters too. Plain sawn, quarter sawn, and rift sawn boards have different grain patterns, and a mismatch in grain reads even when the color is right. We pay attention to the cut of the existing floor and match it as closely as the available material allows. The goal is a seam you do not notice.

Stain Matching Across New and Old

Once the species and width are matched, the stain is what finishes the job. We test sample stains on both the new and the old wood, in the same light, so you can see how the color reads across the seam before we commit. This is exactly the kind of detail that comes up with mixed species, where the same stain can read differently on different woods.

After the stain, one finish coat across the whole floor is what unifies new and old. The new wood may still look a touch cleaner for the first months, but it settles in as it ages and the seam disappears. We walk you through what to expect so the result reads as one floor, not two. Our hardwood floor staining page covers how we test and match stain.

Planning the Seam and the Transition

Where the new floor meets the old, the seam has to be planned. A straight seam across a doorway can work, but a seam that is laced, with the new boards woven into the old, reads as more natural. We plan the seam based on the layout of the room and where the addition or remodel meets the existing house.

If the new space is a different room with a doorway, a transition may be cleaner than a blend, and we handle that too. The choice between blending and transitioning depends on the layout and the look you want. Our custom flooring page covers how we plan seams and transitions between spaces.

How a Fayetteville Floor Match Runs

Matching new to old is a sequence, and the single finish coat across everything is what makes the seam disappear.

  1. 1

    Free In Home Quote and Species Check

    We come to your Fayetteville home, identify the existing species, width, and cut, and talk through how the new floor will tie into the old.

  2. 2

    Source Matching Boards

    We source new boards that match the species, width, and cut of the existing floor so the rhythm of the boards continues across the seam.

  3. 3

    Install and Lace the Seam

    We install the new boards and lace the seam into the existing floor so the joints stagger rather than lining up in a row.

  4. 4

    Stain Samples on New and Old

    We test stain on both the new and the old wood in the same light so the color reads across the seam before we commit.

  5. 5

    Sand and Finish Together

    We sand the whole floor, new and old, to one surface and apply one stain and one finish across everything so the seam disappears.

Can My Fayetteville Addition Match the Existing Floors?

In most cases, yes. If we can match the species, width, and cut of the existing floor, and sand and finish the whole floor together, the new and old read as one. The new wood may look a touch cleaner for the first months, but it settles in as it ages. We identify the existing floor during a free quote and tell you how close a match we can get.

If the existing floor is a species or width that is no longer available, a perfect match may not be possible, and a planned transition at a doorway can be the cleaner choice. We help you weigh a blend against a transition based on what the existing floor is and how the rooms connect. The goal is a result that reads as intentional, not patched.

Serving Fayetteville and the Surrounding Area

Based in Powder Springs, GA, we serve Fayetteville and homeowners across west, north and south metro Atlanta. We are available Monday to Saturday from 8:00 AM to 6:00 PM, and quotes are free. See the full list of towns we serve on our service areas page.

New hardwood floor blended into existing floor by Wala Hardwood Floors

Fayetteville, GA

Residential hardwood floor care by Wala Hardwood Floors LLC.

Get Your Free Quote

Tell us about your residential flooring project. We respond promptly Monday to Saturday.

Fayetteville Questions Answered

Hardwood Flooring in Fayetteville FAQ

Why does new hardwood look different from my existing Fayetteville floors even when it is the same species?

The old floor has aged, been exposed to light, and was finished years ago, while new wood is fresh and has not settled into its color yet. New boards read as brighter and cleaner. The way to unify them is to sand the whole floor together and apply one stain and one finish across everything.

How do you match the species of my existing Fayetteville floor?

We identify the existing species during the quote, red oak and white oak are the most common, and source new boards of the same species. Red oak and white oak take stain differently, so matching the species is the first step to a color match. If the existing floor is a harder to find species, we track down the closest match we can.

Does board width matter when matching new floors to old?

Yes. A floor of wide planks matched with narrow new boards will always read as a patch because the rhythm of the boards is different. We measure the existing width and source new boards to match it so the line of the boards continues across the seam. The cut, plain sawn, quarter sawn, or rift sawn, matters too.

How do you match the stain across new and old wood in my Fayetteville home?

We test sample stains on both the new and the old wood in the same light so you can see how the color reads across the seam before we commit. This matters most with mixed species, where the same stain can read differently on different woods. One finish coat across the whole floor is what unifies the two.

Should the new floor blend into the old or have a transition?

It depends on the layout. A laced seam, with new boards woven into the old, reads as more natural. If the new space is a different room with a doorway, a planned transition can be cleaner than a blend. We help you weigh a blend against a transition based on what the existing floor is and how the rooms connect.

Will the new wood in my Fayetteville addition always look a little different?

The new wood may look a touch cleaner for the first months, but it settles in as it ages and the seam disappears. We walk you through what to expect so the result reads as one floor, not two. Sanding and finishing the whole floor together is what makes the difference most visible up front fade over time.

What if my existing Fayetteville floor is a species or width that is no longer available?

If a perfect match is not possible, a planned transition at a doorway can be the cleaner choice rather than a near match that reads as a patch. We help you weigh a blend against a transition based on what the existing floor is and how the rooms connect. The goal is a result that reads as intentional.

Nearby Towns We Serve

Neighboring Communities

New Meets Old, As One

Fayetteville Additions, Matched to the Old Floor.

Species, width, and stain matched, then sanded and finished as one floor. Call for a free quote on your Fayetteville remodel.

Call for a Free Quote: (770) 837-8367