Hardwood Floor Installation in Metro Atlanta
Precision nailed and glued solid or engineered hardwood tailored to your home layout. Serving residential homeowners across Powder Springs, Cobb County, and metro Atlanta.

Hardwood Floor Installation
A hardwood floor installation is one of the largest single investments a homeowner makes inside the house, and the difference between a floor that lasts for decades and one that fails early almost always comes down to what happens before the first plank goes down. At Wala Hardwood Floors LLC, our small two-person team has been installing residential hardwood across Powder Springs, Cobb County and the wider metro Atlanta area since 2021, and we treat every install as a sequence of decisions that have to match your home, your subfloor and the Georgia climate.
Georgia humidity is the variable that shapes an install more than almost anything else. Wood is a living material that absorbs and releases moisture from the air, so a plank that looks perfect in a warehouse can shrink, cup or gap after it lands in your living room if it has not been given time to reach equilibrium with your home. That is why we never rush the acclimation step, and it is also why we talk through solid versus engineered wood, nail down versus glue down versus floating, and concrete slab considerations before we commit to a method.
We work residential only, we offer free in home quotes, and we are available Monday to Saturday from 8:00 AM to 6:00 PM. Our goal on every installation is a floor that sits flat, stays tight, and looks like it was always meant to be there.
Why Acclimation Matters So Much in Georgia
Acclimation means letting the wood sit in your home so its moisture content can balance with the temperature and humidity of the rooms where it will live. In metro Atlanta, where summer humidity runs high and winter heating pulls moisture out of the air, skipping or shortening this step is the most common reason a new floor develops gaps, crowning or edge lifting later.
We check the moisture content of both the wood and the subfloor with a meter before we begin nailing or gluing. If the wood and the subfloor are too far apart in moisture reading, we extend the acclimation period rather than risk a floor that moves after it is fastened down. This is not a step we are willing to shortcut, because the cost of fixing a cupped or gapped floor is far higher than the cost of waiting a few extra days.
Solid Hardwood Versus Engineered Wood
Solid hardwood is one piece of wood through its full thickness. It can be sanded and refinished multiple times over a long life, and many homeowners love the authentic feel and the ability to change the stain decades down the road. Solid wood is typically nailed down over a wood subfloor.
Engineered wood is built in layers, with a real wood wear layer on top. It is more dimensionally stable than solid wood, which makes it a strong choice for rooms with bigger swings in temperature and humidity, and it is often the right pick for installations over concrete or in lower levels of a home. Both options can look beautiful and perform well when they are matched to the right room and the right subfloor.
During your free quote we walk through the tradeoffs in plain language so you can choose based on how you actually live in the space, not on a sales pitch.
Nail Down, Glue Down and Floating Methods
Nail down installation fastens solid and some engineered planks to a wood subfloor using cleats or staples driven through the tongue. It is the traditional method for solid hardwood over plywood or oriented strand board subfloors, and it gives a floor that feels solid underfoot.
Glue down installation bonds the plank directly to the subfloor using a trowel applied adhesive. It is common for engineered wood, for installations over concrete, and for areas where a floating floor would feel too hollow or shift under heavy furniture.
Floating installation means the planks lock together at the edges but are not fastened to the subfloor below. The floor rests on an underlayment and moves as a single sheet. This is more common with luxury vinyl plank and some engineered click products than with traditional hardwood.
We help you match the method to your subfloor type, your wood choice and the room itself, because the wrong method on the wrong subfloor is a problem that shows up later, not on install day.
Installing Over a Concrete Slab
Many homes in the metro Atlanta area, especially those on a slab foundation or with finished lower levels, have concrete subfloors rather than wood. You cannot nail into concrete, so a slab changes the methods and materials that make sense.
On a slab we typically look at engineered wood with a glue down approach, or a floating installation with the right underlayment. Before anything goes down, we check the slab for moisture, because concrete can hold and release water for a long time after it looks dry, and trapped moisture under a new wood floor is a leading cause of cupping and adhesive failure.
If the slab reads high in moisture, we talk through the options before moving forward, which may include a different product choice or a moisture mitigation approach. We would rather have that conversation up front than hand you a problem later.
Subfloor Prep Is Half the Job
A finished floor is only as flat and stable as the subfloor beneath it. We inspect the subfloor for loose boards, high spots, low spots, squeaks, soft areas and signs of past water before we lay a single plank. High spots are addressed, loose boards are resecured, and obvious low areas are leveled so the new floor has a consistent base.
On a wood subfloor we confirm the framing is sound and that the surface is clean and dry. On a concrete slab we look for cracks, curing compounds, and moisture. Skipping this inspection is how you end up with a floor that telegraphs every imperfection below it, so we treat prep as a real part of the job, not a formality.
"The team moved swiftly and removed the old glued down wood flooring and had the new flooring installed in less than 3 hours - great work and really nice people."
How We Approach a Hardwood Installation
Our install process follows the same dependable sequence on every residential job, so you always know what is coming next.
- 1
Free In Home Quote and Measurement
We visit your home, measure the rooms, inspect the subfloor, confirm whether it is wood or concrete, and talk through solid versus engineered and the install method that fits. You get a clear quote with no surprise add ons later.
- 2
Acclimation and Moisture Checks
Once you choose your wood, we let it acclimate in your home and verify the moisture content of both the wood and the subfloor before any fastening begins.
- 3
Subfloor Prep and Layout
We clean, inspect and level the subfloor, then lay out the plank direction and starter rows so the floor lines up with the room and the light.
- 4
Install, Fasten and Field Check
We nail, glue or float the floor row by row, checking for tight seams, consistent gaps at the perimeter for expansion, and a flat field as we go.
- 5
Final Walkthrough
We clean the new floor, walk it with you, and explain how to care for it during the early weeks as it settles into your home.
Is a New Hardwood Installation Right for My Floor?
A new installation is the right call when you are starting from bare subfloor, when you are replacing carpet or tile with wood, or when an existing floor is too far gone to sand and refinish. If you already have solid hardwood that is simply worn or scratched, refinishing is almost always the more economical path, and we will tell you that honestly during the quote.
Installation is also a strong choice when you are remodeling an entire room, adding on to the home, or pulling out a dated floor that no longer fits how you live. The decision between solid and engineered, and between nail down, glue down and floating, depends on your subfloor, the room, and how you want the floor to perform over time. We help you make that call based on your actual house, not a generic recommendation.
Service Area Coverage
Based in Powder Springs, GA, we provide hardwood floor installation to homes in Cobb County (Powder Springs, Austell, Marietta, Mableton, Kennesaw, Smyrna, Acworth), Paulding, Douglas, Carroll, North Metro, and South Metro Atlanta. See the full list on our service areas page.

Hardwood Floor Installation
Refinished hardwood floor with a warm stain by Wala Hardwood Floors
Get Your Free Quote
Tell us about your residential flooring project. We respond promptly Monday to Saturday.
Hardwood Floor Installation FAQ
How long does hardwood need to acclimate before installation?
It depends on the wood, the subfloor and the conditions in your home. We use moisture meters to confirm the wood and subfloor are close enough in moisture content to install safely, and we extend acclimation if they are not. We will not fasten a floor down before it is ready.
Can you install hardwood over a concrete slab?
Yes, but a slab changes the approach. We typically use engineered wood with a glue down or floating method, and we check the slab for moisture first because trapped moisture under wood is a leading cause of cupping.
What is the difference between solid and engineered hardwood?
Solid hardwood is one piece of wood through its full thickness and can be refinished many times. Engineered wood is built in layers with a real wood wear layer on top and is more dimensionally stable, which makes it a common choice for concrete subfloors and rooms with bigger humidity swings.
Do you move furniture before installing?
We talk through furniture moving during the quote. Clear access to the work area helps the job move smoothly, and we will discuss what we can handle and what is best moved ahead of time.
How do you handle moisture in Georgia homes?
Georgia humidity is a real factor. We acclimate the wood, check moisture content in both the wood and subfloor, and leave the right expansion space at the perimeter so the floor can move with seasonal changes without gapping or cupping.
Do you offer free quotes for installation?
Yes. Every installation starts with a free in home quote where we measure, inspect the subfloor, and explain your options in plain language. We are available Monday to Saturday from 8:00 AM to 6:00 PM.
What areas do you serve for hardwood installation?
We are based in Powder Springs, GA and install hardwood across Cobb County and the west, north and south metro Atlanta area. You can see the full list of towns on our service areas page.
Pair This With
A Floor Installed the Right Way
Acclimation, moisture checks and careful subfloor prep make the difference between a floor that lasts and one that fails early.


